Advanced Engine Oil Flush
Balances Compression Keeps Oil Cleaner for Longer
It is universally agreed that changing your engine oil on a regular basis can help to prolong the useful life of an engine. Taxi drivers who can clock up between 200,000 miles and 400,000 miles on a standard car will always be found to be changing their engine oil and oil filters every 3-6000 miles. Most of us however, tend to forget or not bother. "As long as it goes, it's fine." is most peoples' mentality.
How many of us actually know how to really check the oil?
You can quite easily tell the condition of an engine simply by looking at the state of the oil on the end of the dipstick or as a more advanced measure, actually looking into the engine with the oil filler cap removed!
One car we know of recently had an oil change after using the Engine Flush in the old oil, actually runs smoother at idle and runs a fair bit cooler. An amazing difference compared to the car it was before the Injection Correction treatment. Ticks over like a new engine and the owner actually said it was like giving it a new lease of life.
So what does the Engine Flush do?
Well, basically it thins the existing old oil by use of it's chemical formula allowing the oil to pass more freely around the engine and all of it's components. This action helps dissolve and free any built up blockages present. Effectively it is a cleaner. It frees off the hydraulic valve lifters, frees off sticky piston rings thus balancing the compressions of all the pistons restoring maximum power and performance back to the engine. This also helps to keep the new engine oil cleaner for longer. Use at your next oil change and notice the difference straight away. Buy now for £8.99.
For technical data you can download the Health & Safety data sheet below.